Cold rolled steel coil/plate is hot rolled steel that has undergone further processing. The steel is further processed in a cold rolling mill, the material is cooled at room temperature, and then annealed or tempered. As a result, steel plates with smaller dimensional tolerances and smoother surfaces are produced.
Shanghai Zhengshang Industrial Co., Ltd. produces a series of cold-rolled steel coils/sheets such as corrosion-resistant structural steel, home appliance steel, enamel steel, cooper steel, welding wire steel, and coated base steel. The product has pure steel quality, uniform and stable composition and performance, excellent surface and plate shape quality, and high dimensional accuracy.
|Standard||ASTM, JIS, DIN, EN, GB, etc|
|Material||SPCC, SPCD, SPCE, Q195, DC01, DC02, DC03, DC04, ST12, etc|
|Width||>20-1500 mm, Normal width is 914, 1000, 1219, 1250, 1500 mm|
|Finish||General, bright, dull and mirror finish, oiled or non-oiled|
|Coil ID||508 mm/610 mm|
|Packaging||Export standard packing or according to customers’ requirement.|
|Shipment||Within 10-15 workdays, 25-30 days when the quantity beyond 1000 tons.|
1.Thin thickness and high precision. Through cold rolling steel strip/plates with thinner thickness and higher precision can be obtained;
2.High surface finish: The surface of cold rolled plate is clean and bright, and it is easy to be coated and processed;
3.High stamping performance and low yield point.
Cold rolled Steel Coil Processing
When the rolled steel coil is placed, if it is not processed, it is easy to form iron oxide with the air, because the air is humid and the steel will rust over time. Therefore, a continuous pickling unit must be used to remove the oxidized rust on the surface of the hot rolled steel coil.
The pickled plates are rolled to the thickness of the finished product on a cold rolling mill, generally without annealing. The total compression ratio is generally 60 to 90%.
For rolling general materials, use emulsion with good cooling performance, and use pure oil lubricant with good lubrication performance when rolling thin or hard metals.
The purpose of annealing is to eliminate the hardening caused by cold rolling and to soften the steel plate again, thereby having good plasticity.
Its purpose is to avoid plastic instability of the annealed steel plate during stamping and to improve the quality of the steel plate (flatness and surface condition).
Cold Rolled Steel Production Line
We have a complete production line: pickling unit, reversible cold rolling mill, bell annealing furnace, degreasing unit, smoothing unit, recoiling unit.
Cold Rolled Steel Coil Packaging
Cold Rolled Steel Plate Packaging
As general structural parts and stamping parts: SPCC, Q195, Q235-B cold-rolled strip steel is mainly used for general structural parts and general structural parts in construction machinery, transportation machinery, construction machinery, lifting machinery, agricultural machinery and light industry and civil industries. Stamping.
Hardware industry: ordinary cold-rolled strip steel is suitable for manufacturing bicycles, sewing machines, agricultural machinery and other accessories and hardware products.
Coated products: production of pre-coated steel sheets.
Notice of Cooperation
Monthly Supply: 10000-20000 tons
MOQ: 20 Tons
Delivery Time: 10-35 Days; Specific according to the contract.
Packaging: According to customer needs, provide naked packaging, fumigated wooden pallet packaging, waterproof paper, iron sheet packaging, etc.